Cap - Penthouse 12V (Remove and Replace)

Correction code 1305310213053102

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  2. Lift the 12V cap straight up from over the high voltage controller connector on the RH side of the penthouse, and then remove the 12V cap from the vehicle.
1Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
2Lift the 12V cap straight up from over the high voltage controller connector on the RH side of the penthouse, and then remove the 12V cap from the vehicle.

Install

Installation procedure is the reverse of removal.